Abb Residual Current Device Block DDA204 63A 4 Poles 300mA 4 modules B273292
ABB B273292
8012542732921
Abb Residual Current Device Block DDA204 series:
- Rated voltage 230...400V
- Rated current 63A
- 4 poles
- Rated residual current: 300mA
- 4 modules
Can be coupled with the magnetothermal circuit breakers of the S 200 L, S 200, S 200 M, S 200 P series to realize the magnetothermal differential protection function.
It is possible to couple the DDA 200 with the magnetic-only circuit breakers of the M 200 series, in which case additional thermal type protection must be provided for overload current protection.
Abb Residual Current Device Block DDA204 63A 4 Poles 300mA 4 modules B273292
€435.09
Tax included
€435.09
Tax included
Tax included
-20€
EXTRA
Add the coupon code in the payment page
Limited-time promotion
Out of stock
Incoming
The Residual Current Device Blocks are mechanically designed to prevent mismating between the block and the circuit breaker: the rating of the block must always be equal to or greater than that of the circuit breaker. The plastic clamp on the side allows faster mounting of the block on the circuit breaker, and a push-button prevents possible tripping.
It is used to protect human health in the event of a ground fault (electrical leakage) or phase-to-ground electrocution, thus also providing protection against macro electrical shock, both direct and indirect, on exposed persons.
Type B Residual Current Device Blocks were developed for the detection of fault currents with continuous waveform or high frequency.
Characteristics:
- Reference Standards: IEC/EN 61009 Ann. G IEC/EN 62423
- Residual current type: Type B
- Rated operating voltage: 230/400V
- Rated insulation voltage (Ui): 500V
- Impulse withstand voltage (Uimp): 4 kV
- Maximum Surge Current: 3 kA
- Leakage Current Type: B
- Rated Frequency (f): 50/60 Hz
- Power Loss: 7.6W
- Supply Voltage Connection: Arbitrary
- Electrical Resistance: 10000 cycle
- Number of Poles: 4
- Operating characteristic: Instantaneous (APR High Immunity)
- Connection capacity: Rigid 25 ... 25 mm²
- Flexible 25 ... 25 mm²
- Ambient temperature: -25/+55 °C
- Ambient temperature: In operation -25/+55 °C
- Degree of protection: IP2X
- Dimensions: Product width: 140 mm - Product height: 93 mm - Product depth: 76 mm
- Product net weight: 0.337 kg
There are no reviews
Data sheet
- Voltage:
- 230/400VAC
- Modules:
- 4
- Poles:
- 4P
- RCD Type:
- B
- Differential current :
- 0.3A
- Amps:
- 63A
- Circuit Protections:
- Earth Leakage add-on Blocks
