Bticino Living Now Sand Thermostat KM4691
BTI KM4691
8005543618837
Thermostat Bticino Living Now color Sand, 2 modules, with backlit display for temperature control of a single zone. It is equipped with an input for the connection of a contact line (e.g. window contact). Functioning only with home automation systems.
Bticino Living Now Sand Thermostat KM4691
€77.88
Tax included
€77.88
Tax included
Tax included
-20€
EXTRA
Add the coupon code in the payment page
Limited-time promotion
Items Available: 94
: 5
Pay in installments with Klarna
Thermostat with display to control the room temperature in temperature control systems.
It allows the management of different types of systems and the regulation of the fan speed in case of use of fan coils. Possibility of automatic operation (summer/winter) with compatible systems.
It has 4 capacitive keys with which it is possible to select the desired temperature and the different operating modes (antifreeze, thermal protection and programmed temperature) and, in case of use with fan coils, to manage the fan speed.
It can also be used in mixed heating/cooling systems if the two functions are available at the same time on the same system. A contact is also available on the back of the device that can be used to change the operating status of the thermostat (e.g. window contact, summer/winter switching, etc.).
It is also internally equipped with a humidity probe whose measured value can be used for advanced applications deriving from integration with third-party systems via Driver manager art.F459
Not compatible with 4 and 99 zone temperature control units (L-N-NT-HC-HD-HS4695 and 3550).
Technical data:
- Power supply: 18 - 27 Vdc
- Absorption: 60 mA max
- Operating temperatures: 0 - 40 °C
- Setpoint temperatures: 3 - 40 °C; 0.5 °C increments
- Recommended installation height: 150 cm from the ground
- Load control: on/off, open/close, 3-point or 0 - 10V valves. 2 and 4-pipe fan-coils with On/Off valves, 3-point or 0 - 10V. 2 and 4-pipe fan-coils with speed control 0 - 10V. Gateway
- Overall dimensions: 2 recessed modules.
Advantages:
- Fan button: sets the FAN-COIL fan speed on three levels plus the automatic one.
- Brightness sensor 3. ON / OFF key
- Touch it to switch from ON to OFF status and vice versa.
- ON status: system in normal mode, Set point temperature OFF status: system in antifreeze (7 °C) or thermal protection (35 °C) mode 4
- FAN-COIL fan speed indicator, three levels
- Temperature setting indicator: appears when the temperature is being set
- Heating indicator on
- Cooling indicator on
- Keys for temperature setting
- Window indicator: local contact active according to the programming carried out by the installer
- Thermostat OFF indicator (see point 3)
- FAN-COIL fan operation indicator in automatic mode
- Backlit display
- SCS terminals 14. Local contact (window)
Data sheet
- Bticino MyHOME: Thermostats