Flexible hose for water Enolgas M/F 1/2x1/2 220X420 stainless steel H0371G24

Flexible hose for water Enolgas M/F 1/2x1/2 220X420 stainless steel H0371G24

Enolgas
Calculate shipping cost
06X H0371G24 8010660092729

Flexible hose for water Enolgas Male/Female 1/2" x 1/2" Size 220X420 in AISI 316 stainless steel, Nut in nickel-plated brass.


Request info about this product
Flexible hose for water Enolgas M/F 1/2x1/2 220X420 stainless steel H0371G24

Flexible hose for water Enolgas M/F 1/2x1/2 220X420 stainless steel H0371G24

€4.74 Tax included
€4.74

Flexible hose for water Enolgas M/F 1/2x1/2 220X420 stainless steel H0371G24

€4.74
Tax included

-20€

EXTRA

Add the coupon code in the payment page

Limited-time promotion
qty

Flexible hose for water Enolgas M/F 1/2x1/2 220X420 stainless steel H0371G24

€4.74

Buy it within and receive it from Thursday, 6 November
klarna Pay in installments with Klarna
Two-year warranty
Easy return within 14 days

INSTRUCTIONS FOR INSTALLATION AND USE:

  •  Verify that the length of the tube is suitable for connection between the valve and the appliance(hob, oven, kitchen, boiler, etc.), taking care not to exceed the maximum length allowed indicated on one of the fittings.
  • To make the assembly of the fitting to the valve,by to tape the thread of the fitting with tape to base of P. T. F. E. or other material allowed by the regulations in force, by screwing in by hand without tightening (in the case of a faucet with female end), or, after, inserted in the suitable seat of the female fitting, the gasket supplied, screw in the swivel nut(in the case of a faucet with a male terminal). Connect the other fitting to the appliance in the same way as described.
  • Place the appliance in a definitive way, checking that the hose is not subjected to torsional stress, then tightness of both connections with a hexagon wrench.
  • Check tightness of fittings in the following way: a) Sprinkle the fillets with water and neutral soap; (b) Open the gas tap; (c) In the case of no formation of bubbles, the sealing of the fittings is in compliance with, and vice-versa, in the case of formation of bubbles,close the gas supply, verify that the gaskets are not damaged, to provide for further tightening of the fittings, then repeat the verification in the same way until there is no more formation of air bubbles.

Data sheet

Type:
Flexible hoses
Connection:
M/F
Hoses:
1/2