Siemens Simatic DP ET 200SP Digital Input Module 6ES71366BA000CA0
SIE 6ES71366BA000CA0
4025515082743
Siemens Simatic DP ET 200SP electronic digital input module with the following characteristics:
- Product type designation: F-DI 8x24VDC HF
- Nominal value: 24V
- Allowable range, lower limit: 20.4V
- Allowable range, upper limit (DC): 28.8V
- Current consumption (nominal value): 75mA without load
- Current drawn, max: 21 mA from the backplane bus
- Power draw from backplane bus: 70 mW
- Power dissipation: 4W
- Number of outputs: 8
Siemens Simatic DP ET 200SP Digital Input Module 6ES71366BA000CA0
€257.35
Tax included
€257.35
Tax included
Tax included
-20€
EXTRA
Add the coupon code in the payment page
Limited-time promotion
Items Available: 5
Pay in installments with Klarna
Features:
- Usable Base Units: BU Type A0
- Reverse polarity protection
- Short-circuit protection Yes; electronic (trip threshold 0.7 A ... 1.8 A)
- Output current: up to 60 °C, max. 0.3 A
- 24 V transducer power supply
- Output current, max. 800 mA; Total current of all encoders
- Inputs 6 bytes
- Outputs 4 bytes
- Nominal value (DC) 24 V
- For "0" signal -30 ... +5 V
- For signal "1" +15 ... +30 V
- For signal "1," typ. 3.7 mA
- Cable length: with shielding, max. 1 000 m, without shielding, max. 500m
- Diagnostic alarm
- Power supply voltage monitoring (PWRLED)
- Channel status display Yes; green LED
- for channel diagnostics Yes; red LED
- for module diagnostics Yes; DIAG LED green/red
- Horizontal mounting position, min. 0 °C
- Horizontal mounting position, max. 60 °C
- Vertical mounting position, min. 0 °C
- Vertical mounting position, max. 50 °C
- Altitude during operation, with reference to sea level
- Max. installation altitude above sea level 4 000 m; Limitations for installation altitudes > 2 000 m
- Width 15 mm
- Height 73 mm
- Depth 58 mm
There are no reviews
Data sheet
- Type: Digital Input Modules
