Schneider release coil IMX+OF 110/415V A9A26946
SNR A9A26946
3606480088049
Schneider release coil, with the following features:
- With open/closed contact
- Signal contact composition 1 A/C
- Control voltage [Uc] 100/415 V AC 50/60 Hz
- Control voltage [Uc] 110/130 VDC
- 9 mm steps
- Local signalling action indicator
- Mounting method
- DIN rail mounting bracket
- Colour white
- Tightening torque 1 Nm
Schneider release coil IMX+OF 110/415V A9A26946
€42.64
Tax included
€42.64
Tax included
Tax included
-20€
EXTRA
Add the coupon code in the payment page
Limited-time promotion
Items Available: 97
: 16
Pay in installments with Klarna
Auxiliary contacts are secondary switching devices that operate in conjunction with primary switching equipment such as circuit breakers, relays, and contactors. These contacts are physically connected to the main switching mechanism and are activated simultaneously.
What are they used for? Auxiliary contacts are used for various functions, e.g. self-holding, enabling/disabling, signalling, interlocking.
The switch equipped with electronic protectionrelease (also called current coil) is a switch that is opened, in case of failure, by an electromechanical actuator (opening solenoid) activated by an electronic device able to process a signal proportional to the current flowing through the power contacts.
Features:
- Schneider series
- With open/closed contact
- Signal contact composition 1 A/C
- Rated operational current [Ie] AC-12: 3 A at 415 V "AC" "50 Hz".
- Rated operational current [Ie] AC-12: 6 A at 100 V "AC" "50 Hz".
- Rated operational current [Ie] AC-12: 6 A at 230 V "AC" "50 Hz".
- Rated operational current [Ie] DC-12: 1 A at 110 VDC
- Rated operational current [Ie] DC-12: 1 A at 130 VDC
- Control voltage [Uc] 100/415 V AC 50/60 Hz
- Control voltage [Uc] 110/130 VDC
- 9 mm steps
- Local signalling action indicator
- Mounting method
- DIN rail mounting bracket
- Width 18 mm
- Colour white
- Clamp terminal - 2 cable(s) 2.5 mm² - flexible with cable termination
- Clamp terminal - 1 cable(s) 6 mm² - rigid
- Clamp terminal - 2 cable(s) 2.5 mm² - rigid
- Clamp terminal - 1 cable(s) 4 mm² - flexible
- Tightening torque 1 Nm
- Tropicalisation 2 according to EN/IEC 60947-5-1
- Relative humidity 95 % at 55 °C
- Ambient operating temperature -25...50 °C
- Storage temperature -40...85 °C
There are no reviews
Data sheet
- Type: Coils
- Model: Release
