Siemens LOGO! POWER stabilised power supply 24V/2.5A 6EP33326SB000AY0
SIE 6EP33326SB000AY0
Siemens LOGO! POWER stabilized power supply, with the following characteristics:
- Type of power supply network Single-phase AC or DC
- Input voltage at DC 110...300V
- Overvoltage overload capability 300V AC for 1 s
- Mains buffer operating condition at Vin = 187V
- Buffer time for rated value of output current in case of power failure 40 ms
- Line frequency: nominal value 50 Hz, nominal value 60 Hz
- Line frequency 47...63 Hz
- Input current: at rated input voltage 120V 1.22A, at rated input voltage 230V 0.66A
- Current limitation of inrush current at 25°C maximum: 52A
- Maximum I2t value 3 A²-s
- Protection type: with internal fuse
Siemens LOGO! POWER stabilised power supply 24V/2.5A 6EP33326SB000AY0
€92.40
Tax included
€92.40
Tax included
Tax included
-20€
EXTRA
Add the coupon code in the payment page
Limited-time promotion
Items Available: 35
: 18
Pay in installments with Klarna
Other technical features:
- Weight: 200 grams
- Adjustable output voltage 22.2...26.4V
- Product function adjustable output voltage Yes
- Type of output voltage setting by potentiometer
- Display version for normal operation Green LED for output voltage OK
- Output voltage behavior at power on: No overshoot of Vout (soft start)
- Maximum response delay 0.5 s
- Overvoltage protection design Yes, according to EN 60950-1
- Typical current limitation response value 3.2 A
- Short-circuit proof output properties Yes
- Short-circuit protection design Constant current characteristic
- Lasting short-circuit current rms value: maximum 3.2A
AC supply voltage:
- Minimum rated value 100V
- Maximum rated value 240V
- Initial value 85V
- Full-scale value 264V
Type of protection: with internal fuse-in the power supply unit (Recommended miniature circuit breaker: 10A characteristic B or 6A characteristic C)
Ambient temperatures:
- During operation -25 /+70 °C; with natural convection
- During transport -40 /+85 °C
- During storage -40 /+85 °C
- Environmental category according to IEC 60721 Climatic class 3K3, 5 ... 95% non-condensing
Safety:
- Galvanic isolation between input and output Yes
- Galvanic isolation Very low safety output voltage Uout acc. to EN 60950-1 and EN 50178
- Protection class of operating resources Class II (without protective conductor)
- IP degree of protection: IP20
Dimensions and spacing:
- width of housing 54 mm
- enclosure height 90 mm
- depth of housing 53 mm
Required spacing
- top 20 mm
- bottom 20 mm
- left 0 mm
- right 0 mm
There are no reviews
Data sheet
- Type: Power supplies
