Schneider TM3 analog output module -10 - +10V IP20 TM3AQ4
SNR TM3AQ4
3606480648984
Schneider TM3 analog output module with the following features:
- Number of analog outputs: 4
- Analog input resolution: 12 bits - 11 bits + sign
- Analog output resolution: 11 bits + sign - 12 bits
- Load type: Resistive
- Ohmic load impedance: 1 kOhm voltage - 300 Ohm current
- Stabilization time: 1 ms
- Conversion time 1 ms + 1 ms per channel + 1 controller cycle time
- Rated supply voltage: 24 VDC
- Supply voltage limits: 20.4 to 28.8 V
- Cable type: Shielded twisted cable <30 m per circuit output
- Magnetic field resistance: 30 A/m according to EN/IEC 61000-4-8
- Resistance to fast transients: 1 kV according to EN/IEC 61000-4-4 (I/O)
Schneider TM3 analog output module -10 - +10V IP20 TM3AQ4
€245.04
Tax included
€245.04
Tax included
Tax included
-20€
EXTRA
Add the coupon code in the payment page
Limited-time promotion
Out of stock
Incoming
Pay in installments with Klarna
The product is part of the Modicon TM3 range, an offering of expansion I/O modules for Modicon M221, M241, M251 and M262.
The analog output module provides 4 outputs with 11-bit + signal and 12-bit resolution. It is an output module with a nominal supply voltage of 24V DC and a current draw of 125 mA at 24V DC via external power supply at full load. The product can control variable speed drives or any device with a current or voltage input.
It has isolation between output and power supply at 1500V AC, output and internal logic at 500V AC. For electrical connection it has removable screw terminal with 5.08mm pitch adjustment for outputs and power supply. The product is rated IP20. Dimensions: 23.6 mm (width) x 70 mm (depth) x 90 mm (height). Weight: 0.115 kg. The product is CE certified. It complies with EN/IEC 61131-2 and EN/IEC 61010-2-201 standards.
The module is compatible with Modicon M262, Modicon M241, Modicon M251 and Modicon M221 logic controllers. It supports top hat rails type TH35-15 and top hat rails type TH35-7.5 in accordance with IEC 60715 and plate or panel with mounting via mounting kit. Modicon TM3 expansion modules are designed with a simple interlocking assembly mechanism.
When Modicon TM3 modules are mounted with logic controllers, an extension bus connector is used to distribute data and power. Enhance the performance of your controllers with the Modicon TM3 I/O system, specially designed for Modicon M221, M241 and M251 logic controllers.
Features:
- Absolute accuracy error: +/-1% of full scale - +/-0.2% of full scale at 25 °C
- Temperature drift: +/-0.01%FS/°C
- Repeat accuracy: +/- 0.4 %FS
- Non-linearity: +/- 0.2 %FS
- Output ripple: 20 mV
- Cross talk: <= 1 LSB
- Local signaling: 1 LED (green)PWR
- Electrical connection: 11 2.5mm² removable screw terminal block with 5.08mm pitch adjustment for outputs and supply
- Isolation: Between output and supply at 1500V "AC" - Between output and internal logic at 500V "AC"
- Microinterruption immunity: 10 ms
- Ambient operating temperature: -1055 °C horizontal installation; -1035 °C vertical installation
- Storage temperature: -2570 °C
- Relative humidity: 1095 %, non-condensing (operating) - 1095 %, non-condensing (storage)
- IP degree of protection: IP20
- Pollution degree: 2
- Dimensions: height 90 mm - width 23.6 mm - depth 70 mm
- Weight: 115 grams
There are no reviews
Data sheet
- Type: Analog Output Modules
