Siemens Simatic S7-1500 Digital Output Module 6ES75221BL010AB0
SIE 6ES75221BL010AB0
4047623405924
Siemens Simatic S7-1500 Digital Output Module:
- DQ 32xDC 24V/0.5A HF
- 32 channels in groups of 8
- 4A for each group
- Single channel diagnostics
- Replacement value, counter of switching cycles for connected actuators
The unit supports safe disconnection of load groups up to SIL2 according to EN IEC 62061:2021 and category 3 / PL d according to EN ISO 13849-1:2015. front connector (screw terminals or push-in terminals) to order separately.
Siemens Simatic S7-1500 Digital Output Module 6ES75221BL010AB0
€771.89
Tax included
€771.89
Tax included
Tax included
-20€
EXTRA
Add the coupon code in the payment page
Limited-time promotion
Items Available: 32
: 13
Pay in installments with Klarna
Features:
- DQ 32x24VDC/0.5A HF Product Type Designation.
- Hardware version From FS02
- Firmware version V1.1.0
- Product function I&M data Yes; I&M0 ... I&M3 - Operation with clock synchronism Yes - Prioritized start Yes
- Engineering with STEP 7 TIA Portal plannable/integrated from version V13 SP1 / - STEP 7 plannable/integrated from version V5.5 SP3 / - PROFIBUS from version GSD/revision GSD V1.0 / V5.1 PROFINET from version GSD/revision GSD V2.3 / -
- Supply voltage Nominal value (DC) 24 V - Permissible range, lower limit (DC) 19.2 V - Permissible range, upper limit (DC) 28.8 V - Reverse polarity protection Yes; by internal protection with 7 A per group
- Input current Current consumption, max. 60 mA
- Output voltage / header Nominal value (DC) 24 V
- Power Power withdrawal from the backplane bus 1.1 W
- Power loss Power loss, typ. 3,5 W
- Digital outputs Type of output digital transistor - Number of outputs 32 - Lock on P Yes - Digital outputs, parameterizable Yes
- Short circuit protection Yes; electronic on clock - Trip threshold, typ. 1 A - Limitation of opening inductive overvoltage on L+ (-53 V) - Control of a digital input Yes
- Switching capacity of outputs with ohmic load, max. 0.5 A - with lamp load, max. 5 W
- Load resistance range Lower limit 48 ? - Upper limit 12 k?
- Output voltage for signal "1", min. L+ (-0.8 V)
- Output current for signal "1" nominal value 0.5 A - for signal "1" permitted range, max. 0.5 A - for signal "0" residual current, max. 0.5 mA
- Delay at output with ohmic load "0" to "1", max. 100 µs - "1" to "0", max. 500 µs
- Parallel connection of two outputs for logical combinations Yes - for power increase No - for redundant control of a load Yes
- Switching frequency with ohmic load, max. 100 Hz - with inductive load, max. 0.5 Hz; according to IEC 60947-5-1, DC-13 - with lamp load, max. 10 Hz
- Total current of the outputs Current per channel, max. 0.5 A; see additional description in the manual - Current per group, max. 4 A; see additional description in the manual - Current per module, max. 16 A; see additional description in the manual
- Cable length with shielding, max. 1,000 m - without shielding, max. 600 m
- Diagnostic function Yes
- Substitute values can be activated Yes
- Diagnostic alarm Yes
- Maintenance Alarm Yes Monitoring of supply voltage Yes
- Conductor Break Yes
- Short Circuit Yes
- Cumulative Error Yes
- Dimensions Width 35 mm - Height 147 mm - Depth 129 mm
- Weight 280 grams
There are no reviews
Data sheet
- Type: Digital output module
