Dual wet rotor pump Wilo YONOS MAXO-D 40/0.5-16 DN 40 250mm2120666
WIL 2120666
4048482407999
Twin circulator Twin wet rotor pump Wilo, YONOS MAXO-D 40/0.5-16 synchronous motor according to ECM technology and integrated power regulation for modulating differential pressure control. Can be used in all heating, ventilation and air conditioning applications:
- Mains power supply 1~230 V ±10%, 50/60 Hz
- Rated power P2 650 W
- Min speed 800 1/min
- Speed max 3500 1/min
- Insulation class F
- Degree of protection IPX4D
- Pipe connection on the pressure side DN 40
- Pipe connection on the suction side DN 40
- Construction length l0 250 mm
Dual wet rotor pump Wilo YONOS MAXO-D 40/0.5-16 DN 40 250mm2120666
€2,929.89
Tax included
€2,929.89
Dual wet rotor pump Wilo YONOS MAXO-D 40/0.5-16 DN 40 250mm2120666
€2,929.89
Tax included
Tax included
-20€
EXTRA
Add the coupon code in the payment page
Limited-time promotion
Items Available: 1
qty
Dual wet rotor pump Wilo YONOS MAXO-D 40/0.5-16 DN 40 250mm2120666
€2,929.89
Buy it within and receive it from Tuesday, 9 December
Pay in installments with KlarnaEach pump can be operated in single operation (main/standby operation). To enable automatic exchange of pumps in the event of a blockage, an appropriate switchgear is required on site.
Standard with:
- Preselectable control modes for optimal load matching: ?p-c (constant differential pressure), ?p-v (variable differential pressure)
- 3 speed stages (n = constant)
- LED indicator for setpoint setting and error message display
- Electrical connection with Wilo connector
- Error signal and contact for cumulative block signal
Hydraulic data:
- Maximum operating pressure PN 10 bar
- Head H max 0.0 m
- Flow Q max 24.3 m³/h
- Minimum inlet height at 50 °C 7 m
- Minimum inlet height at 95 °C 15 m
- Minimum inlet height at 110 °C 23 m
- Fluid temperature min. Tmin -20 °C
- Max. fluid temperature Tmax 110 °C
- Min ambient temperature. Tmin -20 °C
- Ambient temperature max. Tmax 40 °C
Motor data:
- IEE energy efficiency index 0.23
- Mains power supply 1~230 V ±10%, 50/60 Hz
- Rated current IN 0.27 A
- Rated current IN 3.5 A
- Rated power P2 650 W
- Min. speed nmin 800 1/min
- Max speed nmax 3500 1/min
- Power consumption (min) P1 min 30 W
- Power consumption P1 max 800 W
- Electromagnetic noise emission EN 61800-3;2004+A1;2012 / residential environment (C1)
- Interference immunity EN 61800-3;2004+A1;2012 / industrial environment (C2)
- Cable gland 2 x M20x1.5
- Insulation class F
- Degree of protection IPX4D
Mounting dimension:
- Pipe fitting on the pressure side DN 40
- Pipe connection on the suction side DN 40
- Construction length l0 250 mm
Materials:
- Pump body Grey cast iron
- Impeller EPP/PS-GF30
- Shaft Stainless steel
- Bearing material Metal-impregnated carbon
Data sheet
- Type: Circulatory
- Version: Double
- Model: Wet rotor

