Telemecanique auxiliary timer contact block 0.1 - 30S LADT2
SNR LADT2
3389110385892
Schneider Telemecanique contact block, with the following characteristics:
- Rated operational voltage [Ue]: 690 V "AC" 25...400 Hz
- Mounting position: Front side
- Pole contact composition: 1 NO + 1 NC
- Operating contacts: Time delay
- Timer type: timing on
- Timing range: 1...30 s
- Conventional thermal current in open air [Ith]: 10A at <60 °C
Telemecanique auxiliary timer contact block 0.1 - 30S LADT2
€57.93
Tax included
€57.93
Tax included
Tax included
-20€
EXTRA
Add the coupon code in the payment page
Limited-time promotion
Items Available: 14
: 1
Pay in installments with Klarna
Other features:
- Type of protection: fuse gG 10 A
- Mechanical endurance: 5 M cycles
- Minimum switching current: 5 mA
- Minimum switching voltage: 17V
- Insulation resistance: > 10 MOhm
- Environmental characteristics: normal environment
- Degree of protection: IP20 according to IEC 60529
- Protection treatment: TH according to IEC 60068
- Storage temperature: -60/+80 °C
- Operating environment temperature: -40/+70 °C
- Operating altitude: 3000 m
Rated operating current [Ie]:
- 6 A AC-15 at 120V
- 1.04 A AC-15 at 690V
- 0.55 A DC-13 at 125V
- 0.1 A DC-13 at 600V
Rated insulation voltage [Ui]:
- 690V according to IEC 60947-5-1
- 600V according to UL 60947-5-1
- 600V complying with CSA C22.2 No 60947-5-1
Rated Closing Power Irms:
- 140A at <= 690V "AC" per IEC 60947-5-1
- 250A at <= 690V DC complying with IEC 60947-5-1
Allowable temporary rated current
- 100A at <60 °C 1 s
- 120A at <60 °C 500 ms
- 140A at <60 °C 100 ms
- No-overlap time
- 1.5 ms on deactivation without overlapping between NC and NO contacts
- 1.5 ms on activation without overlapping between NC and NO contacts
Connections - terminals
- Screw terminals 1 cable 1...2.5 mm²flexible with cable termination
- Screw-fixing terminals 1 cable 1...2.5 mm²flexible without cable termination
- Screw-fixing terminals 2 cables 1...2,5 mm²flexible with cable termination
- Screw-fixing terminals 2 cables 1...2,5 mm²flexible without cable termination
- Screw-fixing terminals 1 cable 1...2,5 mm²rigid
- Screw-fixing terminals 2 cables 1...2,5 mm²rigid
- Screw terminals
Tightening torque
- 1.7 Nm - with flat screwdriver Ø 6 mm
- 1.7 Nm - with Philips screwdriver No 2
- 1,7 Nm - with pozidriv screwdriver No 2
Dimensions and color:
- Color: dark gray
- Height 48 mm
- Width 44 mm
- Depth 61 mm
There are no reviews
Data sheet
- Type: Auxiliary Contacts
