Schneider NG125 MX+OF 220/415V 220/415V Current Throw Release 19064


SNR 19064 3303430190646

Schneider NG125 MX+OF current launch release coil with the following characteristics:

  • Product type or component: Release coil with open/closed contact
  • Control voltage: 230/415V AC 50/60 Hz 110/130V DC
  • Rated insulation voltage: 690V AC 50/60 Hz
  • Rated impulse withstand voltage: 8 kV
  • Mounting bracket: 35 mm symmetrical DIN rail
Request info about this product

Schneider NG125 MX+OF 220/415V 220/415V Current Throw Release 19064

€58.68 Tax included
€58.68

Schneider NG125 MX+OF 220/415V 220/415V Current Throw Release 19064

€58.68
Tax included

-20€

EXTRA

Add the coupon code in the payment page

Limited-time promotion
qty

Schneider NG125 MX+OF 220/415V 220/415V Current Throw Release 19064

€58.68

Buy it within and receive it from Thursday, 25 September
Two-year warranty
Secure Payment
Easy return within 14 days

This MX+OF Acti9 electrical auxiliary is a current-throwing coil release device with open/closed auxiliary contact. It is dedicated to NG125. This device includes an OF open/closed contact to indicate the open or closed position of the switch. It comes with an auto break contact.

Width in steps of 9 mm is 4. The product releases the associated device when it is on. Rated operating current is 6A up to 240V AC, 3A for more than 240V AC, 2A up to 48VDC, and 1A at 130V DC. The control circuit voltage Uc is 230...415VAC or 110...130VDC. The rated operating voltage Ue is 200VAC to 240V AC. The operating frequency is 50 Hz or 60 Hz. It can be mounted on a DIN rail for modular installation.

The operating temperature is between -25°C and 60°C. The storage temperature is between -40°C and 85°C. This product complies with IEC/EN 60947-5-1 standards.

The main task of the trip is to cause the motor circuit breaker to open in the event of a line voltage interruption and thus prevent the motor from starting inadvertently when the voltage is restored.

Rated operating current:

  • 3 A at >= 240 V "AC"
  • 6 A at < 240 V "AC"
  • 1 A at 130 V "DC
  • 2 A at <= 48 V "DC
  • 6 A at <= 24 V "AC"

Features:

  • 9 mm steps: 2
  • Compatibility range: Acti9 Vigi NG125 - Acti9 (Acti9 NG125LMA) - Acti9 (Acti9 NG125NA) - Acti9 (Acti9 NG125)
  • Electrical life: 10000 cycles
  • Wire stripping length: 10 mm
  • Tightening torque: 1 Nm
  • IP degree of protection: IP20 B - IP4
  • Pollution degree: 3
  • Overvoltage category: II
  • Relative humidity: 95 % at 55 °C
  • Operating ambient temperature: -25/+60 °C
  • Storage temperature: -40/+85 °C

Data sheet

Type:
Under-voltage Releases